Cleaning Brushes and Rollers Birmingham

A DIY guide to the proper way to clean brushes, rollers and paint pads after use. When buying paint brushes and rollers you have to make a choice. Buy cheap brushes and rollers just for the job at hand and bin them when you finish, or pay a bit more for good quality equipment and look after it. It is a little known fact that paintbrushes actually improve the more they are used, as long as they are looked after.

Branch Bmn Ltd
0121 3334120
153 Dollman Street
Birmingham
Leeway Home Improvements Ltd
0121 6666369
Keys Court
Birmingham
R & R
0121 3596581
29 Revesby Walk
Birmingham
Architectural Supplies Lowndes Ltd
0121 7725271
51 Auckland Road
Birmingham
Mackinnon & Bailey
0121 6432233
119 Floodgate Street
Birmingham
R K Home Improvements
0121 7724622
5 Heybarnes Road
Birmingham
Plumbing Hardware Diy Centre
0121 7666488
612 Coventry Road
Birmingham
Saifee Hardware
0121 4404188
545 Moseley Road
Birmingham
Rozia Hardware
0121 6225266
St. Martins Market
Birmingham
Leeway Marketing Limited
0121 4498525
27 Woodbridge Road, Birmingham, West Midlands
Birmingham
Data Provided by:
 

Cleaning Brushes and Rollers

When buying paint brushes and rollers you have to make a choice. Buy cheap brushes and rollers just for the job at hand and bin them when you finish, or pay a bit more for good quality equipment and look after it. It is a little known fact that paintbrushes actually improve the more they are used, as long as they are looked after.

Excess Paint

Once you have finished your painting job, clean off as much of the excess paint as possible from the brush, roller or paint pad by scraping on the side of the tin or tray and then working it backwards and forwards across a sheet of newspaper.

Brushes - Emulsion

Getting emulsion out of a brush is easy. Take the brush to the sink and wash off paint from the outside of the bristles. Now hold the brush under the tap with the bristles facing up and work the water into the brush. Squeeze the brush against the side of the sink every once in a while to release any stubborn paint.

Brushes - Solvent based paint

Pour enough white spirit to cover the bristles into a old jar or paint kettle and stand the brush in it for a minute or so. Now work the bristles up and down and against the bottom of the jar to get as much paint out as possible. Once it is fairly clean, use hot, soapy water to wash the white spirit out of the brush (and any remaining paint).

With either method, wrap the bristles in kitchen paper to dry. This also helps to keep the shape of the bristles.

DIY-Extra Tip!

Don't throw away white spirit that you have used to wash brushes if you will be painting with solvent based paints soon after. Leave the jar or paint kettle somewhere safe and leave it to settle for a few days. Then pour the nearly clear liquid on top into a fresh jar/kettle for re-use.

Rollers

First pour the excess paint out of the tray and then wash it out using hot, soapy water. Now run cold water over the roller to get as much paint out of it as you can. Roll the roller up and down in the clean tray to squeeze out more paint, and then return to the cold water. Once the water being squeezed out of the roller runs clear, remove the sleeve from the body of the roller and wrap securely in a plastic bag to store it.

Paint Pads

Very easy to clean as they tend to hold less paint that a brush or roller. Simply run tap water onto the face of the pad and squeeze out against the side of the sink. When it is clean, leave to dry before storing in a plastic bag.

DIY-Extra Tip!

If you have to stop painting for any length of time during a job, wrap your brush on cling film. Wrap a roller in a plastic bag and squeeze the air out, then wrap the tray in a separate bag. This will keep the paint wet for quite a while.

Click here to read more from DIY Extra